Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GX4 GAS MONITOR
PRODUCT USER SAFETY INSTRUCTIONS CONTINUED
Do not open the monitor casing. The unit will not work as intended if opened.
Only remove replaceable parts as listed in the parts and accessories. Do NOT remove any
part of the GX4
, especially the air inlet fitting or the power and auxiliary receptacles under
®
any circumstances. Removing any part will void all warranties.
Do not cover or disconnect the warning alarm that is inside of the unit.
The unit must be returned to RPB
WARNING
chemicals which are poisonous and can cause burns or eyesight loss. Do not break open
the sensor cartridge or crush it, as the chemicals inside may be released.
SETUP AND OPERATION
REGISTRATION
Go to: http://go.myrpb.com/GX4-reg to register your GX4
and important product information.
UPDATES
The GX4
firmware should be updated regularly to ensure you have access to the latest
®
features and maintain compatibility with the latest cartridges. Check for updates every
three months or when installing a new cartridge. Visit http://go.myrpb.com/GX4-Update for
information on the latest software and how to upgrade your unit.
SENSOR CHECK
Checks should be performed when a new cartridge is installed and monthly thereafter. This
will insure the cartridge is within calibration and providing adequate protection.
Follow the Sensor Check instructions on page 22 to check the calibration of the cartridges. If
the cartridge is no longer within calibration, follow the instructions for removing it and replace
it with a new cartridge.
LOCATION
Place the GX4
in a location that protects it from water, impact, and harmful contaminants
®
as well as away from carbon monoxide or other contaminants that could interfere with the
readings from the sensor cartridges (e.g., away from vehicles, forklifts and other machinery).
Ensure that the alarm can be easily heard in the work area over any other noise that may be
present. It may be necessary to use an external alarm (see p. 16 for setup instructions.)
See mounting instructions on p. 13.
10
®
Safety to perform any repairs.
®
Sensors cartridges may contain sulfuric acid or other hazardous
and be notified of software updates
®
Advertenties
Inhoudsopgave
