Advertenties
Beschikbare talen
Beschikbare talen
Additional menu operations
Using the ACI function
This TV has an ACI function which decodes the ACI
(automatic Channel Installation) data.
Using the ACI function allows all TV channels transmitted
from the cable TV station to be properly registered quickly
according to the data from the cable TV station.
Caution
• If your cable TV station broadcasts ACI data and if
"ACI START/ACI SKIP" appears in the AUTO
PROGRAM menu, the ACI function is enabled. In all
other cases, it is disabled.
1 Press the 6
6 buttons to choose ACI START.
6
6
Then press the a
function
When you don't want to use the ACI function:
Press the 6 buttons to choose ACI SKIP and then
press the a button.
If the AUTO PROGRAM menu changes to
another menu:
Depending on your cable TV station, there may be a
broadcast selection menu set up by the cable TV station.
Follow the menu and use the 5 and 6 buttons to
operate the menu. After you have made the setting, press
the a button.
If "ACI ERROR" is displayed in the AUTO
PROGRAM menu:
"ACI ERROR" means that the ACI function is not
working properly. Press the a button to start the ACI
function again.
If "ACI ERROR" still appears even after you have tried
to start the ACI function several times, press the 3
button to start the AUTO PROGRAM function. It does
not cause any problem because all the TV channels are
registered to the programme numbers (PR) by the AUTO
PROGRAM function.
2 When the settings are completed, the EDIT
menu is displayed. Return to the instructions
that you were reading before, and continue the
operation
When the "Initial settings" has been made:
Return to step 6 of "Initial settings" on page 5.
When the "AUTO PROGRAM" has been made:
Return to step 4 of "AUTO PROGRAM" on page 22.
• If you have any questions about the items in the
Broadcast Selection menu or how to operate the
menu, please contact your cable TV station.
• When the cable TV broadcast reception is poor, the
ACI function will not work properly.
• If there is an error in the ACI data itself, the TV
channel cannot be registered properly. If this
happens, turn the ACI function off (ACI SKIP) and
use the AUTO PROGRAM function. Alternatively,
use the EDIT/MANUAL function to correct the
Programme number (PR) setting.
28
a
a button to start the ACI
a
Downloading the data to VCR
You can transmit to the latest Programme numbers (PR)
data to the VCR with the T-V LINK function.
Caution
• This works only when the T-V LINK compatible VCR is
connected to the EXT-2 terminal.
• This works only when the T-V LINK menu is being
displayed.
T-V LINK
DOWNLOAD
TV
VCR
BACK
TV
OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a
a
a
a button
The data transmission begins.
DOWNLOAD
TV
VCR
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu is changed over to
another menu:
The menu operation at the TV side is completed and it is
shifted to the menu operation at the VCR side. Refer to
the VCR Instruction Manual and operate the VCR.
If "FEATURE NOT AVAILABLE" appears at the T-V
LINK menu, ensure the following three items are
correct; then press the a button to retry data
transmission.
• Has the T-V LINK compatible VCR been connected
to the EXT-2 terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is connected to the EXT-
2 terminal to T-V LINK compatible VCR have all its
proper connections?
Advertenties
