Advertenties
Beschikbare talen
Beschikbare talen
Using the TV's menu
PICTURE SETTING
PICTURE SETTING
TINT
CONTRAST
BRIGHT
SHARP
COLOUR
BACK
TV
OK
D0014-EN
TINT
You can select one of three TINT modes (three kinds of
picture settings) to adjust the picture settings automatically.
COOL:
A cool white colour base with a boost in the colour and
contrast levels that creates a more vivid picture.
WARM:
A warm orange/red colour base that creates the appropriate
colour and contrast levels for watching films.
NORMAL:
A normal white colour base with normal colour and contrast
levels.
Picture Adjustment
You can change the picture settings of each TINT mode as
you like.
CONTRAST:
You can adjust the picture contrast.
2 : lower
3 : higher
BRIGHT:
You can adjust the picture brightness.
2 : darker
3 : brighter
SHARP:
You can adjust the picture sharpness.
2 : softer
3 : sharper
COLOUR:
You can adjust the picture colour.
2 : lighter
3 : deeper
HUE:
You can adjust the picture tint.
2 : reddish
3 : greenish
• You can change the HUE setting (picture hue) only
when the colour system is NTSC 3.58 or NTSC 4.43.
(See "Specifications" on page 36.)
To return to the default settings in each TINT
mode:
Press the blue button.
• This returns the picture settings in the TINT mode you
have chosen to the default settings, and stores them in
the TINT mode.
16
NORMAL
RESET
PICTURE FEATURES
PICTURE FEATURES
DIGITAL VNR
AUTO
DigiPure Pro
AUTO
COLOUR SYSTEM
4:3 AUTO ASPECT
PIP POSITION
BACK
TV
OK
D0015-EN
DIGITAL VNR (video noise reduction)
The DIGITAL VNR function cuts down the amount of
noise (interference or snowing) in the original picture.
You can choose from the three DIGITAL VNR function
settings of AUTO, MIN and MAX.
AUTO:
The TV will automatically adjust the level of the DIGITAL
VNR effect to match the amount of noise in the picture,
giving you the best possible picture.
• If you set the DIGITAL VNR effect too high it can make
the picture less sharp. We recommend you use the
AUTO setting if you can.
MIN:
The level of the DIGITAL VNR effect is set to the
minimum. If you set the DIGITAL VNR function to AUTO
but feel that the sharpness of the original picture has not
been reproduced fully, change the setting from AUTO to
MIN.
• The MIN setting is not suitable for low-quality pictures
which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the
maximum. If you set the DIGITAL VNR function to AUTO
but still notice some noise, change the setting from AUTO
to MAX.
• The MAX setting is not suitable for high-quality pictures
which contain very little noise.
DigiPure Pro
The DigiPure Pro function uses the latest in digital
technology to give you a natural-looking picture. The
DigiPure Pro function includes the following two functions.
DigiPure function:
This function helps to create a natural-looking picture by
eliminating unnecessary edges from high-contrast and crisp
images. For images with low-contrast, edges are added to
produce a sharper, more detailed picture.
You can choose from the three DigiPure function settings of
AUTO, MIN and MAX.
• If you set the DigiPure effect too high on a low-quality
picture that contains a lot of noise, this may actually
make the noise worse. We recommend you use the
AUTO setting if you can.
Picture motion compensation function:
This function displays fast-moving pictures (for example,
the players or ball in a football game) more smoothly and
naturally on the screen.
• The effect level of the picture motion compensation
function cannot be changed. The effect level is the same
no matter which of the AUTO, MIN or MAX settings is
used.
1 Choose DigiPure Pro
2 Press the 5
5 buttons to choose a setting.
5
5
Then press the a button
Advertenties
