Advertenties
Beschikbare talen
Beschikbare talen
Displaying a computer screen
This TV can be used to look at a computer screen.
Connecting to the computer
Use a commercially available DVI cable to connect the
TV's input terminal to the computer's analogue RGB output
terminal.
If you want to listen to the sound from the computer, use a
commercially available RCA cable to connect the EXT-4
sound input terminal to the computer's sound output
terminal.
When the sound from the computer is mono, connect to the
EXT-4 L terminal.
• Refer to the computer manual for a detailed explanation
of the connections at the computer side.
• Ensure that the connectors are facing the correct way
when connecting.
• After connecting, tighten the two screws to fix the
connector in place.
Looking at images from a computer
After starting the computer, press the o
6 buttons to choose "PC"
6
6
6
"RGB/PC" is after EXT-4.
You can listen to the sound when the sound from the
computer is connected to the EXT-4 sound input
terminal.
• When the sound from the computer is connected to
EXT-4, by choosing external input EXT-4 the sound
from the computer can be listened to, but the images
from the computer cannot be seen.
• "RGB/PC" cannot be chosen from the PR LIST.
26
Adjusting the position of the computer
screen
The position of the computer screen can be adjusted by
using the coloured buttons.
Red button:
The screen moves up every time the button is pressed.
Green button:
The screen moves down every time the button is pressed.
Yellow button:
The screen moves to the left every time the button is
pressed.
Blue button:
The screen moves to the right every time the button is
pressed.
Enlarging the computer screen
Press the a button while looking at images from the
computer.
Every time the a button is pressed, the screen alternates
between regular (displayed as it is input from the computer)
and full (enlarged to fill the TV screen).
Displaying images from the computer in regular size for
long periods may cause burn-in.
When looking at images from the computer for long
periods, it is recommended that they are displayed in full
size.
Allocation of signals to computer input
terminals
o or
o
o
Pin no.
1
2
3
4
5-8
9
10
11
12
13
14
15
Since the shape of the connectors on the computer side and
the allocation of signals to the pins may differ depending on
the type of computer, ensure that you have the cables
suitable for your computer.
Regular
Full size
size
PC terminal
Signal name
Details
RED
Red video signal
GREEN
Green video signal
BLUE
Blue video signal
–
Not connected
GND
Signal earth
–
Not connected
GND
Signal earth
–
Not connected
SDA
DDC data
HSYNC
Horizontal synchronous
signal
VSYNC
Vertical synchronous
signal
SCL
DDC clock
Advertenties
