Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Changing the cable
Check the cable before use if the cable is found to damaged or
scuffed (fig 51) replace with a genuine Numatic part.
The Cable has been designed to be changed easily.
Unscrew the cable / fuse cover plate (fig 52)
Ensure you dispose of the cable in a proper
manner.
Fig 51
Fig 52
Lift the cable off the pins (fig 53) and remove from the plastic
clips (fig 54).
Fig 53
Fig 54
Remove the rubber grommet, free the cable from the machine
(fig 55)
Unscrew the cable strain relief and replace the cable.
Fig 55
Fit the new cable to the strain relief (fig 56) and refiit to the
machine (fig 57).
Refit Grommet and clip cable in place to the bottom of the
Fig 57
machine (fig 58).
Refit cover and secure with the 3 retaining screws (fig 59).
Fig 56
Fig 59
Fig 58
Advertenties
Inhoudsopgave
