Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All the switches on the NHL machine have been designed to enable easy use and they are placed on the front of the machine.
These switches are to be operated by hand and NOT to be operated by foot.
A
Note.
If machine not functioning correctly, see the Trouble-shooting guide Page 19
Note.
Do not over wet remember 'What goes in, must come out again!.
Operating the machine
B
C
Correct way to use the machine
Fig 30
Fig 31
Fig 32
On heavy soiled carpets you can double the pressure of
the pump to 60 PSI by using the Hi / Lo switch (A)
To active the vacuum press 'vacuum switch' (B)
To activate the pump press 'pump switch' (C)
The NHL 15 floor-tool is provided with rear wheels
allowing the floor-tool to glide over the surface to be
cleaned.
Thus making the cleaning process less tiring and easier to
use.
Apply a slight downward pressure on the wand lifting the
floor-tool blade from the cleaning surface.
Move the floor-tool forward on the rear wheels (Fig 30).
Lift the wand allowing the floor-tool blade to come in
contact with the cleaning surface (Fig 31).
Operate the trigger (Fig 32), allowing the cleaning solution
to penetrate the carpet and slowly draw the floor-tool
rearward Vacuuming the cleaning solution up at the same
time (Fig 33).
Work backwards towards the exit door.
For cleaning tips see page 2
Controls and Switches
Fig 33
Advertenties
Inhoudsopgave
