Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
6.2
Picture of the automatic release
The device is mounted with a automatic release, that means the opening and closing of the gripping arms results through
the set down and lifting of the device.
Pictures the positions of the automatic release
●
Device is lifted through the
lifting equipment/carrier.
●
Gripping arms are opened.
B
●
With faulty switching, the
change-over switch must be
pushed back manually (e.g.
1)
with a screwdriver).
1)
Otherwise there may be faulty switching and when setting down the load this can cause deformation or
damage of the automatic release!
The jerky lifting and lowering of the device with and without load. e.g. caused through driving fast with the
lifting equipment/carrier over uneven grounds is forbidden
5310.0348
●
Device is set up on the gripping
good.
●
Gripping arms are opened.
●
Device is set down with the
gripping good (on the ground).
●
Gripping arms are opened.
V2
A
●
Device is lifted through the lifting
equipment/carrier.
●
Gripping good is clamped and can be
transported to the destination.
/
●
Device is lifted through the lifting
equipment/carrier.
●
Gripping arms are opened.
(laydown position of the device on the
ground)
19 / 25
GB
Advertenties
Hoofdstukken
Inhoudsopgave
