Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Utilisation in
accordance with
„intended purpo-
se"
Environmental
conditions
Mains connec-
tion
Risks from mains
current and
charging current
ud_fr_ls_sv_01055
012011
The charger is to be used exclusively for its intended purpose. Utilisation for
any other purpose, or in any other manner, shall be deemed to be „not in
accordance with the intended purpose". The manufacturer is not liable for
any damage, inadequate or incorrect results arising out of such misuse.
Utilisation in accordance with the "intended purpose" also comprises
-
carefully reading and obeying all operating instructions and safety and
danger notices
-
performing all stipulated inspection and servicing work.
-
following all instructions from the battery and vehicle manufacturers
Operation and/or storage of the charger outside the stipulated area will be
deemed as „not in accordance with the intended purpose." The manufactu-
rer shall not be liable for any damage resulting from such improper use.
For exact information on permitted environmental conditions, please refer to
the „Technical data" in the operating instructions.
High-performance devices can affect the quality of the mains power due to
their current-input.
This may affect a number of types of device in terms of:
-
connection restrictions
-
criteria with regard to maximum permissible mains impedance
-
criteria with regard to minimum short-circuit power requirement
*)
at the interface with the public mains network
see Technical Data
In this case, the plant operator or the person using the device should check
whether or not the device is allowed to be connected, where appropriate
through discussion with the power supply company.
Anyone working with chargers exposes themselves to numerous risks e.g.:
-
risk of electrocution from mains current and charging current
-
hazardous electromagnetic fields, which can risk the lives of those using
cardiac pacemakers
An electric shock can be fatal. Every electric shock is potentially life threate-
ning. To avoid electric shocks while using the charger:
-
do not touch any live parts inside or on the outside of the charger.
-
under no circumstances touch the battery poles
-
do not short-circuit the charger lead or charging terminals
All cables and leads must be complete, undamaged, insulated and adequa-
tely dimensioned. Loose connections, scorched, damaged or inadequately
dimensioned cables and leads must be immediately repaired by authorised
personnel.
II
*)
*)
Advertenties
Inhoudsopgave
