Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Wall mounting and minimum clearances
Mounting on the
wall
Fig. 2 Charger with optional wall bracket (DIN rail
Important! Observe minimum clearances for ventilation purposes. Ensure an adequate
supply of fresh air.
Charging the battery
General remarks
Important! Parallel operation of consumers (e.g. radio, torches, etc.) is possible during
the charging process. Parallel operation of consumers may lengthen the charging time.
If the power consumed is greater than the maximum available charging current, the
battery may be drained. Ensure that the power used for additional consumers is less
than the maximum available charging current (see Technical Data).
2
1
3
5
4
TS 35, EN 50022)
NOTE: If fixing to the wall, please note the weight of the charger. The bracket
must be fitted to a suitable wall using the correct dowels and screws.
WARNING! Risk of explosion from short circuits and arcs. Before connecting
to/disconnecting from battery, disconnect charger from mains supply. During
operation, check that charging terminals and battery poles are properly
connected.
CAUTION! Risk of damage when attempting to charge a faulty battery. Before
charging, ensure that the battery to be charged is fully functional.
> 3
0 m
m
5
Fig. 3 Minimum clearances
3
> 1
5 m
m
> 3
0 m
m
> 1
5 m
m
Advertenties
Inhoudsopgave
