3. Loosen the left adjusting leg at the
bottom of the appliance by turning
it anticlockwise. Using a crosshead
screwdriver, remove the lower right
hinge with the right adjusting leg
attached.
4. Remove the doors from the refrigeration
and freezer compartments of the
appliance and set them aside carefully.
Remove the central hinge using an
Allen key. Carefully remove the small
white cover plate on the other side.
Then place it on the right side in place
of the hinge. First make the holes on
the left side a little larger by turning
the screws in a little. Then unscrew
the screws again. Screw the middle
hinge tight onto the right side of the
appliance.
5. (A) Unscrew the left cover of the top door and
unclip the middle strip.
(B) Then move the cable from the left to the right.
(C) Click the middle strip back again, take the
right cover out of the bag with the supplied parts
and screw it on the right hand side. Keep the left
cover with the supplied parts.
B
A
C
38