Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Filter expired, replace
or disable it
ON/OFF
my favourites
HOME
clean/setting
WATER FILTER
REPLACE
ACTIVATE
DISABLE
ON/OFF
my favourites
HOME
4219-465-06021 MAN. GAG. CADORNA STY_PLUS CMF STW EN-NL-PL Rev.00.indd 11
Installing the INTENZA+ water filter
Remove the small white filter from the water tank and store it in a dry place.
Immerse the INTENZA+ water filter vertically (with the opening pointing up) in cold
water and gently press its sides to let any air bubbles out.
Remove the INTENZA+ water filter from the water. Set the machine according to
the detected water hardness (see the "Measuring water hardness" chapter) and the
letters found on the filter base:
A = soft water – 1 or 2 small squares
B = hard water (standard) – 3 small squares
C = very hard water – 4 small squares
Place the INTENZA+ filter in the water tank, ensuring it is correctly in place. Refill
the water tank and place it in its compartment.
Press the CLEAN/SETTING
FILTER " from the settings menu.
Follow the instructions shown on the display to activate the filter.
Note: you can pause the filter activation procedure by pressing the START/STOP
button. To resume the procedure, press the START/STOP
START/STOP
Replacing the INTENZA+ water filter
When the INTENZA+ water filter runs out, the display will show an alarm message.
1
Replace or deactivate by pressing the CLEAN/SETTING
the " SETTINGS " button.
2
Select the " WATER FILTER " button.
START/STOP
3
Select " REPLACE " to change the filter or " DISABLE " if you do not intend to
use the filter. Confirm with the "
Follow the instructions shown on the display to activate the filter correctly.
clean/setting
START/STOP
button, select " SETTINGS ", and then " WATER
clean/setting
" button.
English
11
button again.
START/STOP
button, and then
clean/setting
23/04/2021 09:53:40
Advertenties
Hoofdstukken
Inhoudsopgave
