Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SIMUDRIVE SD100Hz
8
CLEARING THE REMOTE CONTROLS AND ALL
SETTINGS
8.1
Clearing the memorised remote controls
> Illustration 23
Press the "PROG" button for 7 s until the "PROG" indicator light flashes.
Clears all memorised remote controls.
8.2
Deleting the settings
> Illustration 24
Press the "SET" button for 7 seconds until the "POWER" indicator light flashes quickly.
This causes all settings to be reset to the default values.
9
LOCKING THE PROGRAMMING BUTTONS
> Illustration 25
WARNING
The keypad must be locked to ensure user safety.
Failure to follow this instruction may result in serious injury, e.g. due to crushing by the door.
Press the "SET", "+" and "-" buttons simultaneously.
The programmes are locked. The parameter setting indicator lights come on when the programming button
is pressed.
To access the programming again, repeat the same procedure.
EN
39
Advertenties
Hoofdstukken
Inhoudsopgave
