Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1
ON/OFF switch
2
Switch computer/Quartz
3
Press: on/off spoken buttons
Turn in colour mode: brightness
Turn in positive or negative reading : improve background
4
Press briefly: switch between photo mode, negative, positive
reading
Hold button: changes colour of the background or characters
6
Turn: zoom in/zoom out
Press: overview/magnification
8
Turn: set the position of the line or bar
Press: switch between line, bar or none
Press and turn: adapt the line colour or adapt bar width
9
Turn: adjust lighting
SWITCHING ON/OFF
The device is switched on with button 1. Most screens are switched on by the device. If this is not the
case, switch on the screen as well (see screen manual).
The device is switched off with button 1. Some screens switch off the device when they are switched off.
After switching on, an on-screen bar shows the start-up progress.
LANGUAGE OF THE SPOKEN HELP MESSAGES
Attention! This menu will pop-up when initializing the unit for the first time.
Step 1: Language of the spoken assisting messages
This is where you adjust the language of the spoken buttons. You choose your mother tongue. An inhabitant
of France chooses French. By turning the button 6 you choose the language. Hold button 4 to go to step 2.
Step 2: Preferred voice
Most languages have several voices. In step 2 you choose your preferred voice for the spoken buttons.
Usually you can choose between a male and female voice. In French, for example, you can choose between
Virginie, Thomas, Felix and Audrey. You select the language by turning the big knob. By holding button 4
you will exit the menu.
COMPUTER CONNECTION
Button 2 of the Quartz switches between HDMI 1 and HDMI 2, or HDMI 1 and HDMI 3.
KOBA Vision EasyViewer Quartz
23
Advertenties
Inhoudsopgave
