Ventilation
The air warmed behind the appliance needs to
circulate freely. For this reason, the circulation of air
cannot be compromised.
Caution! Do not cover possible existing ventilation
openings in the back area of the top cover plate!
Connection
• Before you connect the appliance, you have to
make sure that itself and the power plug do not
show any transport damages.
• Connect the appliance only to a shockproof out-
let. The mains voltage has to correspond to the
one stated on the tool identification plate.
• The appliance complies with the guidelines that
are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the backside,
in order to avoid possible vibration noise.
• The appliance can be put into operation by plug-
ging the mains plug into the point.
• A complete switching-off only occurs by pulling
the mains plug.
• If the appliance has been disconnected from the
mains, wait approx. 5 minutes after plugging in
the mains plug before setting the temperature
controller to the desired position.
8830_31_32_33_34_35_multi.indd 18
Operating elements
The temperature adjustment for the refrigerator
compartment is set via the controller on the lighting
inside the refrigerator.
Place it in a central position to set an optimal
temperature for normal use. The more you turn the
knob clockwise, the lower the temperature in the
refrigerator will be. The more you turn the knob
counterclockwise, the higher the temperature in the
refrigerator will be.
VeggiBox
The VeggiBox serves as the optimal storage for
fruits and vegetables.
Temperature in the freezer compartment
The temperature in the freezer compartment is set
to ≤ –18°C by default.
Interior Lighting
If you want to change the light bulb:
ū Disconnect the mains plug from the socket.
ū Turn the temperature controller to Min.
ū Remove the lamp cover.
ū Replace the defective light bulb with a new
one (max. 1.7 W, socket E14).
ū Put back the lamp cover.
ū Plug in the mains plug.
ū Wait approx. 5 minutes before setting the
controller to the desired position.
Freezer Door
The freezer door should always stay closed so that
the food does not defrost. Thereby, the formation of
ice and frost accretion is reduced. Therefore, make
sure that the door is only open for withdrawal of
food or rather for filling the freezer.
Freezing/Storing of Food
Freezer:
• The freezer is designed for the freezing of food,
for the long-term storage of frozen food as well
as for the appliance ion of ice cubes.
• Fresh food should be frozen to the core as quick-
ly as possible, so that the nutritional value, the
vitamins, etc. do not get lost. For this reason, put
the food in one or two rows in the freezer.
• Do not bring them into contact with already
frozen food.
• Do not exceed the freezing capacity per day!
The respective value for the maximum freezing
capacity can be taken from the appliance specifi-
cation sheet at the end of the manual.
- 18 -
26.09.2018 21:26:09