CLEANING AND MAINTENANCE
The oven should be cleaned after every
use. When cleaning the oven the lighting
should be switched on to enable you to
see the surfaces better.
The oven chamber should only be washed
with warm water and a small amount of
washing-up liquid.
● Aqualytic function:
-Pour 50 cl (two glasses) of water at the
bottom of the oven chamber,
- close the oven door,
- set the temperature knob to 90°C, and
the function knob to the top and bottom
heaters on position
- heat the oven chamber for approximately
30 minutes,
- open the oven door, wipe the chamber
inside with a cloth or sponge and wash
using warm water with washing-up liqu-
id.
After cleaning the oven chamber wipe it
dry.
Caution!
Do not use cleaning products contain-
ing abrasive materials for the cleaning
and maintenance of the glass front
panel.
Important!
Do not use any abrasive agents,
harsh detergents or abrasive ob-
jects for cleaning.
Only use warm water with a small
addition of dishwashing liquid to
clean the front of the appliance.
Do not use washing powders or
creams.
Replacing the halogen bulb in the oven
Before replacing the halogen bulb, make
sure the appliance is disconnected from
the electric mains to avoid a possible
electric shock.
Oven lighting
1. Unplug the appliance
2. Remove shelves and trays from the oven.
3. If the oven has telescopic runners, re-
move them also.
4. Use a flat screwdriver to pry the lamp
cover loose, remove it, wash and carefully
wipe it dry.
5. Pull the halogen bulb out by sliding it
down using a cloth or paper. If necessary,
replace the halogen bulb with a new one.
- voltage 230V
- power 25W
6. Replace the halogen bulb in its socket.
7. Replace the lamp cover
33