Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Surface burners applied do not require adjust-
ment of primary air. A correct flame has dis-
tinct internal cones of blue and green colour.
A short, humming flame or long, yellow and
smoking one, without clearly outlined cones,
shows improper quality of gas in the house-
hold piping or a damaged or soiled burner.
In order to check a flame, heat a burner for
around 10 minutes with a full flame, and next
turn the valve knob to the economical flame
position. The flame should not go out or jump
onto the nozzles.
Exchange of a burner noz-
zle – unscrew the nozzle
with special socket span-
ner No 7 and replace with
a new one according to a
type of gas (see tables).
Caution!
Adapting the appliance to a different
type of gas than that indicated by the
manufacturer of the cooker on the
data plate, or purchasing a cooker for
a different type of gas than supplied to
the house, is exclusively the responsi-
bility of the user and the fitter.
In cookers with a safety device, a knob with
a surface burner safety valve is used, fig.
Knobs should be adjusted with the burner
switched on and set to the economical flame
position, using an adjustment screwdriver of
the 2.5 mm size.
Caution!
After adjustment is completed, place
a label indicating the type of gas to
which the cooker is now adapted.
17
Advertenties
Hoofdstukken
Inhoudsopgave
