Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
STEP 2 - Joining the 2 assembled halves in step 1.
Place part 1 upright and position the upper connections (4 & 5) close to part 1. Insert screw C
through the hole of part 1 and connection 4 & 5 and install nut G and tighten firmly.
STEP 3 - Install the lower connections and wheels.
Place the assembled lower connections (2 & 3) under part 1, straighten part 6 so that it is close
to part 1 and parts 4 & 5. Insert screw (B) through part 4 & 5 and part 6, fit nut (G) and tighten
firmly.
Then insert the threaded rod of the caster through the hole in the end of the lower joint. Fit flat
washer (H) and nut (I), repeat for the remaining (8) caster and tighten firmly.
35
OUTDOOR CAMPUS | KORTRIJKSESTEENWEG 1266 | 9051 GENT | 0032 55 23 26 48 | info@outr.be
Advertenties
Inhoudsopgave
