Advertenties
Beschikbare talen
Beschikbare talen
PROXIMA USB
Click "OK" when finished. After you have done this, save your new connection
by selecting "Save" from the "File" menu then click "OK." A new connection icon
will be added to your Hyper Terminal folder.
You are now ready to start entering AT commands.
In the terminal window, type:
AT<Enter>
modem responds
OK
This confirms that the modem and your computer are communicating correctly.
To test the telephone line connection, issue the manual answer command.
Type: ATA<Enter>
The Proxima USB Fax/Modem will pick up the phone line, and try to
communicate. Normally, this command is only used to answer an incoming call
made from another modem. Thus the high pitched noise you will hear from the
speaker. To abort the operation, press any key, or select "Disconnect" from the
"Call" menu.
3.
2 Dialing and Answering Techniques
Depending on what communications software you use to make modem
connections, you may not have
telephone number. This section shows some useful examples of the AT
commands used for dialing and answering operations. The command
characters specific to each function are shown in bold type.
Dialing using the ATD Command
Touch Tone Dialing:
Pulse Dialing:
Tone and Pulse Dialing: ATDP 555 1212 WT 24
Pausing During Dialing: ATDT 9,,555 1212
Auto-Answer and Hook Controls
Enabling Auto-Answer: ATS0=n
Note: In this example, n is a number from 1 to
255 that corresponds to the number of
rings after which your modem answers an
incoming call.
Disabling Auto-Answer:
Manually Answering a Call:
Take modem off-hook:
Hang up modem (on-hook):
Manually Disconnecting a Call:
54
much control of how the modem dials the
ATDT 555 1212
ATDP 555 1212
ATS0=0
ATA
ATH1
ATH0
+++ATH
BAUSCH DATACOM
Advertenties
Hoofdstukken
