Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
c) Locate the table saw in a well-lit and
level area where you can maintain
good footing and balance. It should
be installed in an area that provides
enough room to easily handle the size of
your workpiece. Cramped, dark areas, and
uneven slippery floors invite accidents.
d) Frequently clean and remove sawdust
from under the saw table and/or the dust
collection device. Accumulated sawdust is
combustible and may self-ignite.
e) The table saw must be secured. A table
saw that is not properly secured may move
or tip over.
f) Remove tools, wood scraps, etc. from
the table before the table saw is turned
on. Distraction or a potential jam can be
dangerous.
g) Always use saw blades with correct size
and shape (diamond versus round) of
arbour holes. Saw blades that do not match
the mounting hardware of the saw will run
off-centre, causing loss of control.
h) Never use damaged or incorrect saw
blade mounting means such as flanges,
saw blade washers, bolts or nuts. These
mounting means were specially designed for
your saw, for safe operation and optimum
performance.
i) Never stand on the table saw, do not use
it as a stepping stool. Serious injury could
occur if the tool is tipped or if the cutting
tool is accidentally contacted.
j) Make sure that the saw blade is installed
to rotate in the proper direction. Do not
use grinding wheels, wire brushes, or
abrasive wheels on a table saw. Improper
saw blade installation or use of accessories
not recommended may cause serious injury.
GETTING STARTED
(4.1)
UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking.
Remove the machine, together with the
accessories supplied from the packaging. Check
carefully to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all the
accessories are complete.
If any parts are found to be missing,
the machine and its accessories should be
returned together in their original packaging to
the retailer. Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner.
www.evolutionpowertools.com
Recycle if possible. Do not let children
play with empty plastic bags due to the
risk of suffocation.
ITEMS SUPPLIED
(4.2)
Description
Instruction Manual
Multi-Material Cutting Blade
Table Extensions
Table Extension Support Struts
Leg Set (4 corner Legs)
Cross Braces
Rubber Feet
Blade Guard with
Extraction Port
Dust Extraction Hose
Mitre Gauge
Anti-Bounce Device
Adjustable Rip Fence
Rear Cantilever Braces
Push Stick
Fence Rail (2 piece)
Fence Rail Joining Tongue
Hex Key
Blade Changing Spanners (2pc)
Assorted fixings
Riving Knife
ADDITIONAL ACCESSORIES
(4.3)
In addition to the standard items supplied
with this machine the following accessories
are also available from the Evolution online
shop at www.evolutionpowertools.com
or from your local retailer.
(4.4)
Description
Multi-Material
Cutting Blade
Wood Blade
10
Quantity
1
1
2
4
1 Set
4
4
1
1
1
1
1
2
1
1
1
1
1 Set
1 Bag
1
Part No
RAGEBLADE255F
RAGEBLADE255WOOD
Advertenties
Inhoudsopgave
