Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Radiozenders
  5. Centronic SunWindControl SWC545
  6. Montage- en gebruiksaanwijzing

What To Do If - Becker Centronic SunWindControl SWC545 Montage- En Gebruiksaanwijzing

Zon-windbesturing met display
Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Problem
Drive is not function-
ing, transmission
control light is not lit.
The transmitter does
not react after the
batteries have been
changed.
Drive is not function-
ing, transmission
control light is lit.
Transmission control
light is flashing and
the word BATTERY is
displayed.
The required drive is
not functioning.
Curtain/fabric does
not move into the end
position.
Automatic control
commands are not
executed.
The system is not
extended automatically
when the sliding switch
is set to "".
The system does not
extended manually
when the sliding switch
is set to "" or "".

What to do if ...?

Cause
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
Power supply has been
interrupted for too long.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
Battery power is low.
Wrong group selected.
End position is not set.
1. Sliding switch not in
the "" position.
2. Winter setting is set
to ON.
1. Sunlight intensity is be-
low the threshold value.
2. Wind speed exceeds
threshold value.
1. Wind speed exceeds
threshold value.
2. Sensory equipment
or sensory equipment
connection defective.
3. Winter setting is set
to ON.
Remedy
1. Insert new batteries.
2. Insert batteries cor-
rectly.
Press the RESET button.
Check settings.
1. Reduce distance to
the receiver.
2. Programme trans-
mitter.
Replace batteries.
Select correct group.
Set end position in
setting menu SUN END
POSITION or TIME END
POSITION.
1. Set sliding switch to
the "" position.
2. Set winter setting to
OFF.
1. Adjust sun threshold
value.
2. Wait until wind abates.
1. Wait until wind abates.
2. Check the sensory
equipment.
3. Winter setting is set
to OFF.
de
en
fr
nl
47

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker Centronic SunWindControl SWC545

Gerelateerde Producten voor Becker Centronic SunWindControl SWC545

Inhoudsopgave