Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18 Progress
Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
5 cm
200 cm
OPERATION
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
Switching off
To turn off the appliance, turn the
temperature regulator to the "O" position.
Temperature regulation
The temperature is regulated
automatically.
1. Turn the Temperature regulator toward
lower settings to obtain the minimum
coldness.
2. Turn the Temperature regulator toward
higher settings to obtain the maximum
coldness.
DAILY USE
WARNING! Refer to Safety
chapters.
2
min.
200 cm
2
CAUTION! Refer to the
assembly instructions for the
installation.
A medium setting is generally
the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance depends
on:
• room temperature,
• how often the door is
opened,
• the quantity of food stored,
• the location of the appliance.
CAUTION! If the ambient
temperature is high or the
appliance is fully loaded, and
the appliance is set to the
lowest temperatures, it may run
continuously causing frost to
form on the rear wall. In this
case the dial must be set to a
higher temperature to allow
automatic defrosting and
therefore reduced energy
consumption.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
