Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.7 Transport and assembly
The workstation frame must be moved by two persons only, and in such cases must be retract-
•
ed.
Do not drag or pull the workstation frame over the floor.
•
Assemble the workstation frame with the supplied tools only. They are the only tools which en-
•
sure that the screws can be tightened to the correct torque.
2.8 Use of the workstation frame
Do not allow children to use the workstation frame unsupervised. Children may be unaware of
•
the dangers presented by the workstation frame. They would be in serious danger of injuring
themselves, possibly even with fatal consequences. Further adjustment must then be impossi-
ble as a safeguard against use by children.
The workstation frame must only be used in appropriate areas.
•
Do not use the workstation frame on an uneven surface. In such conditions it will not be steady.
•
Never exceed the maximum load on the workstation frame.
•
2.9 Specific dangers
When adjusting the height of the frame there is danger of injury. Make sure that there is no-one
•
else in the immediate surroundings of the frame.
When assembling the workstation frame, make sure there is ample space to avoid collisions
•
(i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable
directions.
Make sure there is ample space to avoid collisions if there are objects on the work surface such
•
as computers or computer peripherals.
Make sure there is clearance of at least 25 mm from all other furniture, all around the
•
workstation frame.
2.10 In an emergency
Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
•
Have the workstation frame repaired by specialists. Refrain from using the workstation frame
•
until it has been successfully repaired.
2.11 Maintenance and upkeep
The workstation frame and its components are low-maintenance items and need no special
•
regular maintenance.
Do not perform any repairs on the work surface or other components yourself.
•
Do not alter the construction of the work surface or its frame.
•
Any faulty components removed must be replaced with new, original components from the
•
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.12 Cleaning
Always unplug this workstation from the electrical outlet before cleaning.
•
Dust the workstation frame once a week with a dry cloth.
•
Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
•
night.
2.13 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
for the purpose for which it was intended.
•
if it is completely safe to do so.
•
English
8
Advertenties
Inhoudsopgave
Probleemoplossen
