Download Inhoudsopgave Inhoud Print deze pagina

Downlight; Advanced Functions; Setting The Camera Angle - M-E Vistadoor Vistus VDV-2010 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

gong receiver from the BELL or FG series can
be controlled.

Downlight

With the switch (16.6) the 3 downward shin-
ing LEDs can be switched off permanently. If
the switch is set to ON, the 3 LEDs are auto-
matically activated at dusk. If the switch is
set to OFF, the LEDs do not light up at all.

ADVANCED FUNCTIONS

Setting the camera angle

With this outdoor unit, you can choose from
6 different display angles. Proceed as follows
to set the angle (you may need a second
person at the indoor unit):
10. Take off the front part of the housing and
remove the cover (5).
11. Activate the camera by ringing the bell at
the outdoor unit.
12. With the camera activated, press and
hold the button (17) until the outdoor unit
emits a tone.
13. Now press the bell button (on the VDV-
2020, press the upper bell button) to
change the display mode. After each fur-
ther press on the bell button, the system
switches to the next camera mode. After
the last one, it switches back to the first
mode.
14. To save the camera mode, briefly press
the button (17), the outdoor unit confirms
the successful saving with a tone.
NOTE: You can choose between full 180°,
centre, top, bottom, right or left.
Changing the display mode via the indoor
station is not supported.
33
ENGLISH
VDV-2010
VDV-2020
GB

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Vistadoor vistus vdv-2020

Inhoudsopgave