Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.7.4 Linking 2 hülstaflex premium motor-driven base frames with
one remote control
1. Possibility:
The dual port synchro cable (see illustration under 3.6) can be used to
connect the receivers of both beds. Regardless of which remote hand-
held transmitter is used, both hülstaflex premium motor frames move
together in the selected function. The adjustment speed and position
may differ slightly if there is a large difference in load (e.g. one half of the
bed is unloaded).
Please note!
Before first use under load, both base frames must be moved to the
maximum adjustment and back to the flat position.
2. Possibility:
Pull out the connecting plug from the 2nd bed receiver to the motor.
Press and hold the button on the receiver, reconnect the connecting
cable to the motor. Then press any button in the transmitter of bed 1.
Now you can adjust both hülsta hülstaflex premium motor -driven base
frames simultaneously via the remote hand-held transmitter of bed 1.
The adjustment speed and position may differ slightly if there is a large
difference in load (e.g. one half of the bed is unloaded).
Please note!
Before first use under load, both base frames must be moved to the
maximum adjustment and back to the flat position.
For your remote control, you have the option of using a special app
control for operation with your smartphone.
The app can be downloaded from the addresses given on the Internet
or simply use the QR code shown.
Only one user can connect to a receiver at any time.
Using the dual port synchro cable, 2 hülstaflex premium motor-driven
base frames with remote control can be operated using the app control
on the smartphone
Should the bed system not react to the signals of the hand-held
transmitter, it can be adjusted to the flat lying position by pressing the
button on the receiver.
32
- App-control
APP Store IOS
3.7.5 Set up contact between remote control and 2 bed systems
If 2 remote controlled motor-driven hülstaflex premium are to be adjusted
with one hand-held transmitter, pull the receiver plug of one bed out of
the connection socket (Fig. 7). Press and hold the button on the receiver
and reinsert the plug back into the connection socket. Then press one
of the buttons on the transmitter - both beds can now be adjusted
simultaneously with one hand-held transmitter.
4. In the event of a power cut
What to do in the event of a power failure?
In case of a power cut, the back and foot sections of the hülstaflex can
be lowered manually.
Lowering
IMPORTANT
There must not be a person in the bed.
Google Play
To manually lower the back and foot section, remove mattress, lift
section or back section (ideally with the help of a second person) and
remove Bowden cables from their respective plastic fitting.
Lower the uncoupled back or foot section to the 0 position. To use in
reverse order, reinsert Bowden cables into fittings.
Receiver
Fig. 11
Adjustment back section
Adjustment foot section
33
Advertenties
Hoofdstukken
Inhoudsopgave
