Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. General information
5.3 Troubleshooting
Problem
Solution
Problem
Solution
Problem
Solution
Problem
Solution
60 - Manual Runner DTM300i Treadmill
The computer of the treadmill is not switching on.
1. Check if the plug is connected to a grounded outlet
2. Check the switch near the adapter cable is set to ON or I.
3. Check if the fuse near the switch . If the fuse is broken contact your
reseller.
Segments of the screen do not light up.
The screen LEDS are damaged, contact your reseller.
The screen shows "------".
The safety key is not placed (correctly). Place the safety key into the
designated area on the treadmill.
My iOS or Android device is not connecting to the DTM300i.
1. Turn off any app used for connecting to the DTM300i.
2. Turn off the treadmill with the 1/0 switch. Wait 5 seconds, and turn the
treadmill back on again.
3. Enter the bluetooth settings menu of your mobile device. Choose the
option "Forget this device" and turn off the bluetooth.
4. Repeat the bluetooth connection steps described in this manual.
In case if your problem is not resolved or not described, consult the
fitness reseller where you purchased this product.
Advertenties
Hoofdstukken
Inhoudsopgave
