Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Use
4.5 Maintenance
Maintaining the sliding surface
Every 1 or 2 months (even if the treadmill is not in use) or every 50 hours of use, the sliding
surface under the running belt needs to be lubricated with the included silicone lubricant.
Make sure that the power is disconnected and loosen the adjusting bolts of the rear roller.
Lubricate the surface, distribute the silicone lubricant evenly. When you are finished fasten
the adjustment bolts of the rear roller. Center the treadmill again as described on the next
page
Cleaning
The metal and plastic parts of the product can be cleaned by using standard cleaning
products. However, make sure that all parts are completely dry before using the product
again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once every six
weeks. For fastening use the tool supplied with the product.
To prevent unnecessary wear, the product may only be used indoors and in a dry
environment.
54 - Manual Runner DTM300i Treadmill
Advertenties
Hoofdstukken
Inhoudsopgave
