Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SCHEDULED MAINTENANCE TABLE
Procedure
Battery charger
Battery (WET) electrolyte level check
Main broom cleaning
Side and main broom height check
Hopper dust filter check and cleaning ("A" method)
Hopper lifting system hydraulic oil level check
Skirt height and operation check
Dust guard system water filter check and cleaning (optional)
Brake cables check/adjustment
Hopper dust filter check and cleaning ("B" method)
Filter shaker operation check
Main broom driving belt check
Steering chain cleaning
Steering chain check/adjustment
Safety device operation check
Brake drums check/adjustment/replacement
Hopper dust filter check and cleaning ("C" method)
Main broom drive belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Hydraulic system oil change
(*)
For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more often in dusty areas.
(4) Or more frequently if the machine is used on slopes.
(5) Change the hydraulic system oil after 500 hours or every year.
03/2016
INSTRUCTIONS FOR USE
Upon delivery
(1)
1466465000 - SW5500, FLOORTEC R 985
Every
Every
Every
10
50
100
hours
hours
hours
(2)
(3)
(2)
(*) (4)
(3)
(*)
(*)
(*)
(*)
(2)
(*) (4)
ENGLISH
Every
Every
200
year
hours
(3)
(*)
(*)
(*)
(*)
(*)(5)
19
Advertenties
Hoofdstukken
Inhoudsopgave
