Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• If necessary, the door can be switched from right
to left.
• Warning! Before carrying out any work on the
appliance, always disconnect the power plug
from the mains.
• To avoid personal injury and material damage,
carry out the shift of the door hinge with two
people.
• We recommend that the door stop only be
changed by qualified persons.
• Before you start, it is fundamental that you:
ū Always pay attention to the number of wash-
ers on the trunnion and screws.
ū Always align the doors so that they close
tightly.
a) Remove the cover e of the upper door hinge r.
b) Remove the dummy plugs q from their holes.
c) While securing the door, unscrew the screws w
holding the upper door hinge r. Remove the
door with the door hinge and place it somewhere
safe.
d) Slightly tilt the appliance back and unscrew the
adjustable front feet y.
e) Remove the screws u that hold the lower door
hinge t.
a) Refer to drawing B when unscrewing the journal
of the lower hinge t from the plate.
b) Turn the plate so that its underside is facing
upwards.
c) Then, replace the pivot and secure it with the
nut. The newly configured lower door hinge
receives the number i.
a) Fix the lower door hinge i with the screws u
onto the bottom left of the refrigerator.
b) Screw the adjustable front feet y back onto the
unit.
c) Place the door on the trunnion of the lower door
hinge and press it against the appliance.
d) While securing the door, secure the upper door
hinge r with the screws w on the upper left side
of the refrigerator so that the upper bearing pin
slides into the opening on the door.
e) Place the cover e on the upper door hinge r
and the blind plugs q in the holes in the top
right side of the appliance.
8805_multi.indd 23
Blind plug
Upper screw
Cover door
Step A
hinge
Upper door
hinge
Step B
Lower right-
hand hinge
Step C
Adjustable foot
Lower screw
Lower left-hand
hinge
- 23 -
q
w
e
r
t
y
u
i
16.11.2018 11:44:44
Advertenties
Inhoudsopgave
