Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Plast Coat 25 · 35
4.1
CONTROL UNIT
1
Master switch 0–1
2
Indicator lamp
3
Feed rate regulator 0–10
4
Changeover switch
5
Mains cable
6
Connection for remote control
6
1
The mortar spraying machine can be switched on using the
master switch (1, fig. 3).
The indicator lamp (2) shows that the machine is ready for op-
eration.
The feed rate can be continuously adjusted by means of the
feed rate switch (3).
4.1.1
1
Releasing the pressure or removing the pump jacket.
Pump runs in reverse direction.
2
"0" drive is switched off.
3
"AUTO" remote control using the spray lance.
4
Spraying or pulling on the pump jacket.
Pump runs in the forwards direction.
1
2
3
4
4.2
DRIVE
5
If overloading occurs then the mortar spraying machine
switches off. Turn master switch (1, fig. 3) and changeover
switch (4, fig. 3) to "0". Wait at least 10 seconds and then turn
the mortar spraying machine back on.
4.3
RECEPTACLE (FIG. 5)
1 receptacle made of high-grade steel with grating.
Contents: 60 liter
SYMBOLS ON THE CHANGEOVER SWITCH
(fig. 4)
2
O
GB
CONTROL UNIT
3
AUTO.
4
1
31
Advertenties
Hoofdstukken
Inhoudsopgave
