Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
11 Removing and fitting the front
wheel
Removal:
1. Pull apart the upper and lower halves of the electrical
connector that is located at the rear of the fork.
2. Slide the cable tie downwards from the fork, or cut it.
3. Remove the front wheel. ➠ Chapter 18.2.1 "Original
User Manual | General" (CD).
12 Technical data
MOTOR
Definition
Output
Maximum torque
Weight of motor
Assist levels
Control
Switch-off speed
BIKE TYPE
Pedelec
LI-ION BATTERY
Rated voltage
Rated capacity
Energy
Weight
Permitted charging temperature
Recommended charging temperature
Recommended storage temperature
Brushless electric motor with gear unit and freewheel
250 W
35 Nm
2.88 kg
70, 150, 250 watts
Via speed sensor
25 km/h at the highest assistance level
MAXIMUM PERMITTED GROSS WEIGHT
(bike, rider, luggage, trailer + load)
130 kg
36 V
9 Ah
324 Wh
2.4 kg
0 to 45°C
+10 to +30°C
+18 to +23°C
Fitting:
1. Slide the cable ties with the cable on to the fork leg.
2. Fit the front wheel. ➠ Chapter 18.2.1 "Original User
Manual | General" (CD).
3. Plug the two halves of the connector together. Take
notice of the arrows on the connectors – they must be
facing one another!
4. Slide the two cable ties back up the fork until they
remain in place of their own accord and cannot slip.
WEIGHT OF RIDER
105 kg max.
CHARGER
Charging time
Number of battery cells
Weight
Protection class
Charging temperature
Storage temperature
DISPLAY AND CONTROL UNIT
Protection class
Weight
Operating temperature
Original User Manual | Groove 2.0
6 to 7 hours
40
450 g
only in a dry envi-
ronment
0 to 45°C
-20 to +40°C
IP 65 (protected
against dust,
splashes and
water)
90 g
-20 to +60°C
23
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
