Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NO
SYMBOL
FUNCTION
11
a) Switch the
front and rear
light on/off
b) Change the
indication (VEL,
ODO, or DST)
c)
tings menu)
12
a) Change mode
b)
tings menu)
13
Switch the sys-
tem on/off
12 + 13
Clear the DST
+
(trip distance)
11 + 12
Change the
+
back-lighting of
the display
8.1
Switching on and off
8.1.1 Switching on
1. Switch the battery on.
Battery switch
2. Hold the
button down for two seconds.
8.1.2 Switching off
1. Hold the
button down for two seconds.
2. Switch the battery off.
BUTTON PUSH
a) 2 seconds
b) 1 second
c) 1 second
(in the Set-
a) 1 second
(in the Set-
b) 1 second
2 seconds
2 seconds
3 seconds
8.2
Assist mode
MODE
ASSISTANCE
Assistance up to at
most 25 km/h
Assistance up to at
most 20 km/h
Assistance up to at
most 15 km/h
Press
briefly to change the assistance. The different
MODE
modes change in the following sequence:
box marks the selection:
tance when no box is displayed.
The most recently selected mode is displayed
when you switch back on again.
8.3
Pushing assistance
The pushing assistance helps you to push the bike. That is
particularly helpful when you are on a steep hill that you
cannot manage by pedalling. Proceed as follows to use the
pushing assistance:
1. Get off the bike.
2. Push your bike.
3. Press
. Pushing assistance mode starts after three
MODE
seconds. The
is now positioned at the
Hold the button down until you no longer need the
pushing assistance.
Only use the pushing assistance when you are
pushing the bike. You must not use the pushing
assistance when you are riding! This can cause the
motor to "stutter", i.e. to keep starting and
stopping.
Original User Manual | Groove 2.0
RECOMMENDATION
Use for small climbs
(bridges etc.).
For a high range
,
,
You can ride without assis-
You can ride without assis-
symbol.
. A
19
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
