CHECKS
- The copper jumper in the termi-
nal board and the electrical cable
must be secured together under
the screw in its tightening direc-
tion, and the electrical connec-
tions must be securely tightened
before connecting the appliance
to the electricity mains.
- Check for any electrical dispersion
between the phases and the earth,
and for electrical continuity be-
tween the external casing and the
mains earth.
*
Bezoek de Garantie sectie van de Unox-website (www.unox.com) voor meer informatie
- Check that the power supply volt-
age does not deviate from the
nominal voltage value specified
on the appliance rating plate when
the appliance is operating. If this
is not the case, wire the phases as
specified on the "technical specifi-
cations" sheet enclosed.
19