Husqvarna K 970 III Gebruiksaanwijzing pagina 25
Verberg thumbnails
Zie ook voor K 970 III:
- Gebruiksaanwijzing (136 pagina's) ,
- Gebruiksaanwijzing (136 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Pull the choke control fully to get the start throttle
position.
4. Push the choke control to disable the choke. The
start throttle stays in position.
5. Hold the front handle with your left hand.
6. Put your right foot on the lower section of the rear
handle to push the product against the ground.
WARNING:
rope around your hand.
7. Pull the starter rope slowly until you feel a resistance
as the starter pawls engage. Then pull continuously
and quickly.
1429 - 002 - 04.05.2021
Do not wind the starter
CAUTION:
rope fully and do not let go of the starter
rope handle when the starter rope is
extended. This can cause damage to the
product.
8. Push the throttle trigger to disengage the start
throttle and set the product at idle speed.
To stop the product
WARNING:
continues to rotate for a while after the
engine stops. Make sure that the cutting
blade can rotate freely until it fully stops. If it
is necessary to stop the cutting blade
quickly, let the cutting blade lightly touch a
hard surface. Risk of serious injury.
•
Move the STOP switch to the right to stop the
engine.
Do not pull the starter
The cutting blade
25
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
