Download Inhoudsopgave Inhoud Print deze pagina

Husqvarna K 970 III Gebruiksaanwijzing pagina 24

Verberg thumbnails Zie ook voor K 970 III:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

7. Pull the starter rope slowly with your right hand until
you feel a resistance as the starter pawls engage.
Then pull continuously and quickly.
CAUTION:
rope fully and do not let go of the starter
rope handle when the starter rope is
extended. This can cause damage to the
product.
8. Push the choke control when the engine starts. If the
choke is pulled out, the engine will stop after some
seconds. If the engine stops, pull the starter rope
handle again.
24
Do not pull the starter
9. Push the throttle trigger to disengage the start
throttle and set the product at idle speed.
To start the product with a warm engine
WARNING:
blade can rotate freely. It starts to rotate
when the engine starts.
1. Push the decompression valve to decrease the
pressure in the cylinder. The decompression valve
goes back to its initial position when the product
starts.
2. Make sure that the STOP switch is in the left
position.
Make sure that the cutting
1429 - 002 - 04.05.2021

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

K 970 iii rescueK 970 smartguard

Inhoudsopgave