Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
COMPUTER
DISPLAY
[TIME] time: 00:00~99:59.
[RPM] revolutions per minute: 0~15~999
(Alternates with SPEED every 6 seconds.)
[SPEED] speed in Km/h: 0.0~99.9 km/h
(Alternates with RPM every 6 seconds.)
[WATT] watt: 0-999 Watt
(Alternates with LEVEL every 6 seconds.)
[LEVEL] resistance level: 1~24 level
(Alternates with WATT every 6 seconds.)
[CALORIES] calories in Kcal: 0~999kcal
[DISTANCE] distance in Km: 0.00~99.99 km
(ODO-KM Total: The distance in km of all training units is
displayed.)
[PULSE] pulse: P~40~240, max value is available.
(Heart symbol flashes on/off if pulse data transmit.)
Program: MANUAL, PROGRAM (P1-P12), WATT, USER,
H.R.C, FAT
U0-U4 User: Selection of the user (U0-U1-U2-U3-U4) with
default values [ ♂ ♂ ] male / [ ♀ ♀ ] female, [AGE] age, [HEIGHT]
height and [WEIGHT] weight.
Start display:
1. Code for speed programming
2. Bluetooth identification number for APP operation
3.KM Total (ODO)
KEYS
[T-TEST] key: Fitness test by measuring your recovery rate.
(F1-6)
[E-ENTER] key: Function select and confirmation key.
[R-RESET] key: Press to return to select program. Reset the
computer by 3 sek.press.
[+] - [-] keys: Increases or decrease value or select option.
(Only flashing information can be changed/ confirmed.)
Pressing the [+] and [-] keys simultaneously for 2 seconds will
reset the ODO display and restart the computer.
[START/STOP] key: Starts or stops/ interrupts program.
OPERATION
Use
1. Connect the power adapter to the product and a properly
wired outlet. The display inside the computer will illuminate
accompanied by a beep and briefly show a speed programming
code, bluetooth identification number and ODO. Then appears
the user number (U0-U4). By pressing the [E] button you can
choose between the default values [ ♂ ♂ ] male, [ ♀ ♀ ] female,
[AGE] age, [HEIGHT] height and [WEIGHT] weight. You can
change the values with the [+/-] keys and confirm with the [E]
key. After the specification, the values are saved. At the next
training session, the user data can simply be confirmed with the
[E] key to get to the program selection or the manual program
can be started directly by pressing the [START/STOP] key.
2. Use the [+/-] keys to select a program category: MANUAL,
PROGRAM, WATT, USER, H.R.C., FAT and confirm by pressing
the [E] key. The default values such as time, distance, calories
and pulse can be called up in the selected program using the [E]
button and changed using the [+/-] buttons. If you set one of the
default values time, distance, calories, it will be counted down to
0.
3. When the program and the default values are set, press the
[START/STOP] key to start training.
4. Pressing the [START/STOP] key again ends or interrupts
the program. All values reached up to that point are save until
the device switched off and you can continue training based on
these values or you can set all functions to zero using the [R]
key.
5. The computer switches off automatically approx. 4 minutes
after the end of the training.
19
GB
Advertenties
Inhoudsopgave
