Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.4 (Dis)assembly of glass pane in door
9.4.1 Disassembly of glass pane in door
•
Avoid damage when removing/fitting the glass pane.
!Caution
•
Avoid/remove fingerprints on the glass pane(s) as they will burn into the glass.
Use the supplied glass pane cleaner to remove fingerprints from the glass pane(s).
!Tip
To remove the glass pane in the door, please follow the instructions below (see appendix 2, fig. 8):
Ø
Open the door.
Ø
Lift out the door by sliding it upwards.
Ø
Place the door on a flat surface.
Ø
Unscrew the nuts on the inside of the door.
Ø
Remove the glass strips.
Ø
Lift out the glass pane. The pane seal is also taken out.
9.4.2 Assembly of glass pane in door
Assemble the glass pane in the door according to the steps described in section 9.4.1 'Disassembly of glass pane
in door', only in reverse order.
•
Do not fasten the bolts too tight to avoid breaking off and/or stripping: overtightening will cause breakage.
!Caution
•
Place the glass pane (including new pane seal) with the logo to the bottom right.
Advertenties
Hoofdstukken
Inhoudsopgave
