Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
1
Charging the vacuum pump
To maintain optimal battery function, charge at least once every
3 to 6 months.
Charge the vacuum pump fully before the first use. Place the pump in
the charging station. Insert the smaller USB connector (USB TYPE-C)
into the port at the charging station. Insert the larger USB connector
(USB TYPE-A) into a power adapter* and plug it into a wall socket.
If liquid has been sucked in, the vacuum pump must not be placed in
the charging station uncleaned. You can also connect the charging
cable to the USB port of a computer. During charging, the indicator
light will flash slowly. When the pump is fully charged, the indicator light
will continuously glow. Charging can take 2 to 5 hours.
2
Vacuum sealing of boxes, bags and bottles
Place the vacuum pump on the
valve of the box/the bag and
press down lightly. Press the
ON/OFF button on the pump.
The pump sucks the air out of
the box. The vacuum sealing
stops automatically when the
vacuum pressure reaches the
right level. The vacuum sealing
can also be manually stopped
at any time by pressing the
ON/OFF button.
14
1.
Clean the vacuum boxes before using them for the first time.
Before each use, make sure that the seal of the lid and the edge
of the box are clean and dry.
Do not overfill the box. Always leave 0.39 - 0.79 in free to the
edge. Make sure the food inside the box does not come in
contact with the valve on the inside of the lid.
All boxes can be used to heat food in the microwave. Before
starting, make sure that the vacuum is released and the lid is
loose.
When not vacuum sealed, all bags may be used for gentle de-
frosting in the microwave (defrost setting) as long as the contents
are not oily.
The opening of the bag has to be completely clean and dry.
Ensure that the valve inside the bag remains clear and does not
come into contact with its contents. The pump must not absorb
any liquids (e.g. water, oil, meat juices). The built-in liquid sensor
stops the pump when liquid is sucked in towards the pump. Dry
2.
the pump thoroughly before continuing the vacuum process.
* Power supply unit specifications can be found in the technical data.
Use
Advertenties
Inhoudsopgave
