Advertenties
Beschikbare talen
Beschikbare talen
Set-up and opera�on
Push the plug into an earthed socket.
·
Press the ON/OFF switch to start the heater; the heater will make a
·
beep sound once. The display shows
To switch off, press the Wi-Fi/Standby bu�on and the heater will
·
stop opera�ng. Now take out the plug from the socket.
Note: The heater always starts at the standard heater se�ngs.
·
Note: A radiator cools down slowly. Therefore, give it sufficient �me
·
before you touch it or move it (use the handle!).
Se�ng the temperature
Turn the MODE bu�on to the desired temperature se�ng between 5°C and 35°C.
·
Clockwise increases the temperature, counter clockwise decreases the temperature.
If you turn the MODE bu�on completely counter clockwise, the temperature drops to
·
under 5°C. The heater now stands in the frost protec�on mode. The display shows
Se�ng the hea�ng capacity
Press the MODE bu�on once and subsequently turn it counter clockwise for se�ng
·
the hea�ng capacity:
-
H1=Use hea�ng element 1=1000 W
-
H2=Use hea�ng element 2=1000 W
-
H3=Use hea�ng element 1+2=2000W
Press the MODE bu�on once again and wait 5 seconds to confirm the desired se�ng.
·
Wi-Fi and App opera�on
The heater can also be operated using an app. For that purpose, the heater must be
connected to a Wi-Fi modem.
· Download the Eurom Smart App via the QR-code below or search for 'Eurom
Smart' in the APP store or Google play.
Press the Wi-Fi/Standby bu�on
·
switch to the standard heater se�ng:
-
Temperature 20°C
-
Timer off
-
Hea�ng level: H3 (2000W)
.
32
to
.
Advertenties
