Advertenties
22 | English
Predefined working mode
Function
Note: The result may vary depending on the material, screws
and the amount of force applied by the user. Carry out a test
run before any work on the workpiece itself.
Auto Slow-down (wood) (GDR
When using the Auto Slow-down (wood) working mode, the
power tool reduces the speed when tightening (impact mech-
18V-215)
anism in action)
from being over-tightened because the user has sufficient
time to let go of the on/off switch (9).
Note: It is not possible to preselect the speed in the Auto
Slow-down (wood) working mode.
Note: If screws with a length of < 50 mm are used in the Auto
Slow-down (wood) working mode and no impact is detected,
it is possible that the power tool may not reduce the speed in
good time.
A) The Auto Shut-off (metal) and Auto Slow-down (wood) working
modes can only be activated when the on/off switch (9) is fully
pressed and the screws are being screwed in completely.
Maintenance and Service
Maintenance and Cleaning
Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Clean the tool holder (1) and locking sleeve (2) from
u
time to time.
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
1 609 92A 9N6 | (21.10.2024)
A)
. This working mode prevents the screw
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When the batteries are shipped by third parties (e.g. air
transport or forwarding agency), special requirements on
packaging and labelling (e.g. ADR regulations) must be met.
A dangerous goods expert must be consulted when prepar-
ing the items for shipping.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EU countries:
Power tools that are no longer suitable for use and defective
or used batteries must be disposed of separately. Use the
designated collection systems.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Recommended application
Material: Wood
Wood screw: 5 x 50 mm
Bosch Power Tools
Advertenties
