Advertenties
18 | English
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage
No-load speed
– Setting 1
– Setting 2
Impact rate
– Setting 1
– Setting 2
Max. tightening torque
Max. loosening torque
Machine screw diameter
Tool holder
C)
Weight
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
D)
tion
and during storage
Recommended rechargeable batteries
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V 4.0Ah
B) Measured at 20–25 °C with rechargeable battery ProCORE18V 12.0Ah
C) Depending on battery in use
D) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2.
GDR 18V-215:
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 100 dB(A); sound power
level 108 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
GDX 18V-285:
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 99 dB(A); sound power
level 107 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
GDR 18V-215:
Tightening screws and nuts of the maximum permitted size:
2
2
a
= 21.3 m/s
, K = 1.6 m/s
h
1 609 92A 9N6 | (21.10.2024)
GDR 18V-215
3 601 JN2 0..
V=
–1
min
2100
–1
min
3300
–1
min
3000
–1
min
3800
Nm
215
Nm
mm
M6–M16
¼" internal hexagon
kg
1.4–2.4
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GDX 18V-285:
Tightening screws and nuts of the maximum permitted size:
2
a
= 15.8 m/s
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
GDX 18V-285
3 601 JN2 1..
18
18
A)
2000
A)
2800
A)
3000
A)
3600
A)
285
–
500
M8–M18
½" external square
¼" internal hexagon
1.5–2.5
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
2
Bosch Power Tools
B)
B)
B)
B)
B)
B)
Advertenties
