Advertenties
Quick Links
VDP301RL – 30mW ROCKET RED LASER LIGHT EFFECT
1. Introduction & Features
Thank you for buying the VDP301RL! Please read the manual thoroughly before bringing this device into service.
Make sure that the device was not damaged in transit. If the device is damaged, you should contact your dealer and
postpone installation of this device.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
any smoke or smell will gradually disappear.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device are not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. General Guidelines
• This device is designed for professional use on stage, in discos, theatres, etc. The VDP301RL should only be
used indoors with an alternating current of max. 230V AC/50Hz.
• Laser effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "7. Technical Specifications", p.3), dust
and moisture. Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
• Use an appropriate safety cable to fix the device (e.g. VDLSC7 or VDLSC8).
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp
explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
VDP301RL
1
VELLEMAN
Advertenties
Gerelateerde Handleidingen voor HQ Power VDP301RL
Samenvatting van Inhoud voor HQ Power VDP301RL
- Pagina 1 • Keep the device away from children and unauthorised users. 3. General Guidelines • This device is designed for professional use on stage, in discos, theatres, etc. The VDP301RL should only be used indoors with an alternating current of max. 230V AC/50Hz.
- Pagina 2 6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents. 7. There are no user-serviceable parts, apart from the fuse (see “4. Installation” on p.2). 8. Contact your dealer for spare parts if necessary. VDP301RL VELLEMAN...
- Pagina 3 130°C The information in this manual is subject to change without prior notice. VDP301RL – 30mW ROCKET RED LASER LIGHT EFFECT 1. Inleiding en kenmerken Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Ga na of het toestel niet werd beschadigd tijdens het transport.
- Pagina 4 • Deze veiligheidsregels niet naleven, is niet alleen zeer gevaarlijk, maar is ook een overtreding van bestaande regelgeving. De gebruiker is verantwoordelijk voor correcte plaatsing en bediening van de laser, zodat deze geen gevaar oplevert. De producent is niet verantwoordelijk voor schade door misbruik of foute plaatsing van dit toestel. VDP301RL VELLEMAN...
- Pagina 5 130°C De informatie in deze handleiding kan te allen tijde worden gewijzigd zonder voorafgaande kennisgeving. VDP301RL – 30mW ROCKET RED LASER LIGHT EFFECT 1. Introduction et caractéristiques Nous vous remercions de votre achat ! Lisez le présent manuel attentivement avant la mise en service de l'appareil.
- Pagina 6 • Transportez l'appareil dans son emballage originel. • Toute modification de l’appareil est interdite pour des raisons de sécurité. • N’utilisez votre VDP301RL qu’à sa fonction prévue. Tout autre usage peut causer des courts-circuits, des brûlures, des électrochocs etc. Un usage impropre annule d'office la garantie.
- Pagina 7 500 x ∅160mm Poids total 5.8kg Couleur du laser rouge Puissance du laser 30mW, Classe Laser IIIb Température ambiante max. 45°C Température max. du boîtier 130°C Toutes les informations présentées dans ce manuel peuvent être modifiées sans notification préalable. VDP301RL VELLEMAN...
- Pagina 8 1. Introducción & características ¡Gracias por haber comprado el VDP301RL! Lea cuidadosamente las instrucciones del manual antes de montarlo. Verifique si el aparato ha sufrido algún daño en el transporte antes de la puesta en marcha. Si es el caso, no conecte el aparato a la red y póngase en contacto con su distribuidor.
- Pagina 9 Conecte el aparato a la red eléctrica para activarlo. No haga funcionar el aparato continuamente. Ajuste la sensibilidad sonora del micrófono incorporado girando el botón en la base del aparato hasta que la reacción de los rayos a la música le satisfaga. VDP301RL VELLEMAN...
- Pagina 10 VDP301RL – 30mW ROCKET RED LASER LIGHT EFFECT 1. Einführung & Eigenschaften Wir bedanken uns für den Kauf des VDP301RL! Lesen Sie diese Bedienungsanleitung vor Inbetriebnahme sorgfältig durch. Überprüfen Sie zuerst, ob Transportschäden vorliegen. In diesem Fall, nehmen Sie das Gerät nicht in Betrieb und setzen Sie sich mit Ihrem Fachhändler in Verbindung.
- Pagina 11 Kurzschluss, Brandwunden, elektrischem Schlag, Lampenexplosion, usw. verbunden. 4. Installation a) Sicherung • Trennen Sie das Gerät vor dem Sicherungswechsel von der Netzspannung. • Ersetzen Sie eine Sicherung nur durch eine Sicherung gleichen Typs (siehe “7. Technische Daten” S.13): VDP301RL VELLEMAN...
- Pagina 12 3. Die mechanisch bewegenden Teile dürfen keinen Verschleiß aufweisen. 4. Sorgen Sie dafür, dass die Netzkabel nicht beschädigt werden. Lassen Sie das Gerät von einer Fachkraft installieren. 5. Trennen Sie das Gerät vom Netz ehe Sie mit den Servicearbeiten anfangen. VDP301RL VELLEMAN...
- Pagina 13 Sicherung 3A, 250VAC (5 x 20mm) (bestelcode FF3N) Abmessungen 500 x ∅160mm Gesamtgewicht 5.8kg Farbe Laser Leistung Laser 30mW, Laser Klasse IIIb Max. Umgebungstemperatur 45°C Max. Temperatur Gehäuse 130°C Änderungen in Technik und Ausstattung ohne vorherige Ankündigung vorbehalten. VDP301RL VELLEMAN...