Advertenties
Beschikbare talen
Beschikbare talen
increase the chamber fi lling time.
If the set temperature is too low, the steam ironing will not be possible. In this case, water droplets can escape from the holes in
the iron soleplate.
Steam does not escape from the holes in the iron's soleplate when the iron is placed vertically. However, a steam boost can still
be used in this position. For example, for ironing with a steam jet of clothes hung on hangers. It is not allowed to iron clothing in
this way on persons or animals. This can cause serious burns.
Ironing advice
It is recommended to iron slightly damp fabrics. Ironing will be faster and easier. In this case, set the steam controller to the mini-
mum setting. Steam will come out of the damp fabric, not from the iron. This will save the electricity you need to power your iron.
If you need to dampen areas of ironed fabrics, use a separate sprayer. When dampening the fabric, do not point the water jet at
the iron.
It is recommended to iron on ironing boards and to use iron power cord holders if the board has such a function. The handle should
be positioned so that the risk of the power cord coming into contact with the hot iron's soleplate is minimised.
Special care should be taken when ironing synthetic fabrics. Check the product label to see if ironing is allowed at all and at what
temperature. For particularly delicate fabrics, a slightly dampened, thin cotton fabric can be used as an intermediate layer between
the iron's soleplate and the synthetic fabric.
Iron maintenance
Check the iron's soleplate after each use. Allow the soleplate to cool down completely before cleaning. Clean the soleplate with a
slightly damp, soft cotton cloth. Protect the soleplate from scratches and do not use any chemicals such as dishwashing liquids,
alcohol, acids, solvents, etc. for cleaning. Do not use sharp tools, hard sponges, scrapers, etc. to clean the soleplate so as not
to scratch its surface.
Use a soft, slightly damp cloth to clean the remaining parts of the iron.
If the fabric sticks to the iron's soleplate during ironing, stop ironing immediately, disconnect the iron from the power supply and
remove any remaining fabric from the iron's soleplate as soon as possible using a damp, soft cotton cloth. The cleaning operation
should be carried out with gloves that provide protection against the high temperature of the iron's soleplate.
Never immerse the iron in water or any other liquid.
Iron storage
Store the iron in a dry place, disconnected from the power supply. The power cord must be unplugged from the socket. Store the
iron with the water tank emptied. Store in a dark and well-ventilated place. The place of storage should prevent access by children.
Store the iron in such a way that the iron, especially the soleplate, will not be damaged.
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Insulation class
Net weight (cover)
Water tank capacity
Steam generation
O R I G I N A L
EN
Unit
[V~]
[Hz]
[W]
[kg]
[ml]
[g/min]
I N S T R U C T I O N S
Value
67100
110-120 / 220 - 240
50 - 60
1100
I
0.6
80
10 ± 3
13
Advertenties
