Advertenties
All manuals and user guides at all-guides.com
Operating Manual
BENNING MM 7
Digital Multimeter for
-
DC voltage measurement
-
AC voltage measurement
-
DC current measurement
-
AC current measurement
-
Resistance measurement
-
Diode testing
-
Continuity testing
-
Capacity measurement
-
Frequency measurement
-
Temperature measurement
Contents:
1.
Operating instructions
2.
Safety notes
3.
Contents of delivery
4.
Description of unit
5.
General data
6.
Ambient conditions
7.
Electrical data
8.
Measuring with the BENNING MM 7
9.
Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental notice
1.
Operating Instructions
This operating manual is intended for:
-
electricians and
-
qualified electrotechnical persons
The BENNING MM 7 is designed for measurements in dry surroundings. It must
not be used in electrical circuits with rated voltages higher than 1000 V DC and
750 V AC (for more details, see section 6 "Ambient conditions").
The following symbols are used in the operating manual and on the
BENNING MM 7 itself:
This symbol indicates an electrical hazard.
This symbol indicates sources of danger when using the
BENNING MM 7 (see documentation).
This symbol on the BENNING MM 7 indicates that the unit is
protection insulated (safety class II).
This symbol on the BENNING MM 7 indicates the fuses which it
contains.
This symbol appears in the display for a discharged battery.
This symbol indicates the "continuity-testing" application. The
buzzer provides an audible signal.
This symbol indicates the "diode-testing" application.
This symbol marks the range "capacity testing".
(DC) voltage or current.
(AC) voltage or current.
Earth (voltage to earth).
BENNING MM 7
11/ 2008
11
Advertenties
