Inhoudsopgave
Advertenties
en
de
Water i lter
A water i lter can prevent scale buildup.
Before a new water i lter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water i lter (21) i rmly into the
water tank with the aid of the measuring
spoon (20).
2. Fill the water tank (17) with water up to
the max mark.
e
3. Press and hold the
for at least three seconds. The menu
opens.
e
4. Press the
off /
button (13) repeat
j
edly until the display shows
filter
.
Activate filter
5. Select
rotary knob (15).
6. Press the start button (10).
7. Place a receptacle with a capacity of 0.5
litres under the outlet (19a).
8. Press the start button (10).
9. Water will now l ow through the i lter to
rinse it.
10. Empty the container.
The appliance is ready to use once more.
Note: Rinsing the i lter simultaneously ac
tivates the setting for the
display.
The i lter is no longer effective when the
Change filter!
display appears, or at
the latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no buildup of limescale (this could
damage the appliance). Replacement i lters
can be obtained from retailers (TZ70003) or
from customer service (467873). If no new
filter
i lter is used, turn the
No / Old
.
26
All manuals and user guides at all-guides.com
off /
button (13)
j
Note: You can use the i lter indicator to
mark the month in which you inserted the
No / Old
i lter. You can also mark the month in which
you will need to replace the i lter next (at
with the upper
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
Change filter!
i lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
Menu settings
You can adapt the appliance to your indi
vidual needs in the menu settings.
1. Hold the
2. Press the
setting to
3. Select the required setting with the up
4. Coni rm by pressing the start button
To leave the menu without making any
changes, turn the rotary selector to
and press the start button (10).
e
off /
button (13) down for
j
at least 3 seconds.
e
off /
button (13) repeated
j
ly until the required menu item appears
in the display.
per rotary knob (15).
(10).
Exit
Advertenties
Hoofdstukken
Inhoudsopgave
