Inhoudsopgave
Advertenties
NMR8x, NMS8x, NRF8x Modbus-Kommunikationsprotokoll
Messstatus Gerät
Displacer at reference position
Displacer hoisting up
Displacer stop
Level measurement balanced
Upper interface level balanced
Lower interface level balanced
Bottom measurement balanced
Upper density done
Middle density done
Lower density done
Release overtension
Calibration activated
Seek level
Follow level
Seek upper interface level
Follow upper interface level
Seek lower interface level
Follow lower interface level
Seek bottom level
Stopped at high stop
Stopped at low stop
Repeatability testing
Seek water level
Water dip done
Proof test done
Dip displacer
Verify weight
Verify distance
Start detector update
Detector update running
Verify updated detector software
Finish detector update
Startup
Endress+Hauser
3.2.2
Messstatus
Je nach Einstellung im Parameter Kompatibilitätsmodus wird der Inhalt von Parameter
Messstatus angepasst. Im NMS5x-Modus (Option Nxx5xx) werden nur Werte, die auch
im Parameter "Messstatus" des NMS5x vorhanden sind, an den Bus ausgegeben. Im
NMS8x-Modus (Option Nxx8x) stehen alle Messstatus-Werte in diesem Parameter zur
Verfügung.
Parameter Messstatus steht nur in den Geräten der Serie NMS8x zur Verfügung. Für
alle anderen Geräte meldet dieser Parameter den Wert Null zurück.
NMS8x
Code
Benennung im NMS8x
[dezimal]
1
Displacer at reference position
2
Displacer hoisting up
4
Displacer stop
5
Level measurement balanced
6
Upper interface level balanced
7
Lower interface level balanced
8
Bottom measurement balanced
9
Upper density done
10
Middle density done
11
Lower density done
12
Release overtension
13
Calibration activated
14
Seek level
15
Follow level
19
Seek upper interface level
20
Follow upper interface level
21
Seek lower interface level
22
Follow lower interface level
23
Seek bottom level
25
Stopped at high stop
26
Stopped at low stop
27
Repeatability testing
28
Seek water level
29
Water dip done
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
33
Startup
Datenzuordnung und -format
Kompatibilitätsmodus
Code
Benennung im NMS5x
[dezimal]
1
Displacer at reference position
2
Displacer hoisting up
4
Displacer stop
5
Level measurement, balanced
6
Upp. I/F level, balanced
7
Midd. I/F level, balanced
8
Bottom meas. balanced
9
Upper Dens, finished
10
Middle Dens, finished
11
Bottom Dens, finished
12
Release over tension
13
Calibration activated
14
Seek level
15
Follow level
19
Seek Upper I/F level
20
Follow up. I/F level
21
Seek Mid. I/F level
22
Follow Mid. I/F level
23
Seek Bottom Level
25
Stopped at High Stop.
26
Stopped at Low Stop
27
Repeatability testing
28
Seek water level
29
Water level, balanced
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
32
Maintenance Mode
4
Displacer stop
NMS5x
9
Advertenties
Inhoudsopgave
