Advertenties
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
▶
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
Description
1
Product overview
Auxiliary handle
@
Switch-on interlock
;
On/off switch
=
Grip
%
Guard
&
Battery release button
(
Battery status indicator
)
Battery
+
Hose connector for sawdust extraction
§
Pivoting guard operating lever
/
Base plate
:
Pivoting guard
∙
Parallel guide
$
Direction-of-rotation arrow
£
Intended use
The product described is a cordless circular saw. It is designed for sawing wood or wood-like
materials, plastics, drywall panel, gypsum fiber board and composite materials.
The circular saw has a hose connector for sawdust extraction that is designed for common types of
vacuum cleaner hose. A suitable adapter might be required for connecting the dust-extractor hose
to the saw.
Use only saw blades approved for the product that comply with the specifications set out in the
▶
technical data (e.g. diameter, speed of rotation, thickness, material, etc...). Grinding and cut-off
wheels and saw blades made of highly alloyed high speed steel (HSS) are not permissible.
Saw only flat workpieces that offer a big enough contact surface to accommodate the whole of the
▶
base plate.
Do not use this product to cut metals, materials containing metal, mineral materials, brick and
▶
materials containing quartz.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For this product, Hilti
recommends the use of the batteries stated in the table at the end of these operating instructions.
• For these batteries, use only Hilti chargers of the type series listed at the end of these operating
instructions.
Items supplied
Circular saw, saw blade, clamping flange, mounting flange, clamping screw, hex key, operating
instructions
26
Clamping lever for cutting angle adjust-
|
ment
Cutting angle scale
¡
Rafter hook
Q
Spindle lock button
W
0° cutting line indicator
E
45° cutting line indicator
R
Bevel angle preselector
T
Clamping screw for parallel guide
Z
Clamping lever for cutting depth adjust-
U
ment
Hex key
I
Mounting flange
O
Clamping flange
P
Clamping screw
Ü
2360043
*2360043*
Advertenties
