Advertenties
Press "INTENZA filter" and follow
2.
the instructions on the display.
Changing or removing the water
filter
You can also operate your appliance
without a water filter.
Press "Care & maintenance".
1.
Press "INTENZA filter".
2.
Press "Replace" or "Remove" and
3.
follow the instructions on the dis-
play.
Notes
Dispose of spent water filters ac-
¡
cording to local regulations.
Always store replacement water fil-
¡
ters in a cool and dry place in their
original sealed packaging.
Tips
You should also change your wa-
¡
ter filter for reasons of hygiene.
With a water filter you need to de-
¡
scale your appliance less fre-
quently.
If you use a water filter, your coffee
¡
will be more flavoursome.
If your appliance has not been
¡
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
The water filter can be purchased
¡
from retailers or customer service.
→ "Accessories", Page 51
7.5 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for first use. First use appears when
switching on for the first time or after
resetting to the factory settings.
Open the appliance door.
1.
Check that the mains switch is set
2.
to .
→ Fig.
24
Before using for the first time en
Close the appliance door.
3.
Press
to switch the appliance on
4.
and wait until the appliance has
rinsed.
Follow the instructions on the dis-
5.
play.
The display will guide you through
a
the programme.
Tip: To call up brief information,
press .
Notes
If you want to set up Home Con-
¡
nect now, follow the instructions in
the Home Connect app.
→ "Setting up Home Connect",
Page 58
If "Demo mode" is selected, only
¡
the displays will work. You cannot
dispense a beverage or run a pro-
gramme.
7.6 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
The appliance has been pro-
¡
grammed at the factory with stand-
ard settings for optimum operation.
The integrated fan switches on
¡
each time a beverage is dispensed
and switches off again after
around 5-7 minutes.
The grinder has been factory-set
¡
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level.
→ "Setting the grinding level",
Page 56
If you do not perform any actions
¡
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings. → Page 59
53
Advertenties
