Advertenties
PANEL FACILITIES
See page 3 for Location of Panel Facilities.
[FRONT PANEL]
@ POWER (STANDBY/ON) switch/indicator
¢ With the power cord connected to a wall outlet, the unit will
always
be supplied
with
power
and
remains
in standby
condition when it is turned off by pressing the power switch.
¢ The indicator lights during standby.
¢ The POWER switch selects the transformer secondary even in
STANDBY
position. The unit circuitry will work as long as the
power cord is connected to a power outlet.
¢ When not using the unit for a long period, disconnect the power
cord.
@® SP-A selector switch/indicator
Depress
this switch
for sound
reproduction
with the speaker
systems connected to the SPEAKERS A terminals.
ON:
The indicator lights: Sound is heard from the speaker systems.
OFF:
The indicator is off: No sound is heard from the speaker systems.
Set to this position when listening with headphones.
@ SP-B selector switch/indicator
Depress
this switch for sound
reproduction
with the speaker
systems connected to the SPEAKERS B terminals.
ON:
The indicator lights: Sound is heard from the speaker systems.
OFF:
The indicator is off: No sound is heard from the speaker systems.
Set to this position when listening with headphones.
NOTE:
SP-A and SP-B cannot be used at the same time.
@ PHONES jack
When using headphones, insert the plug into this jack.
8
<ARE1116>
E
© BASS EQ switch/indicator
NOTE:
This function does not operate when the CD DIRECT or DAT
DIRECT switch is in the ON position.
© EQ LEVEL control
NOTE:
This control does not operate when
the CD DIRECT
or DAT
DIRECT switch is in the ON position.
@ BASS tone control
Use to adjust the low-frequency tone. The center position is the
FLAT (normal) position. When moved to the right, low-frequency
tones are emphasized;
when
moved to the left, low-frequency
tones are de-emphasized.
NOTE:
This control does not operate when the CD DIRECT or DAT
DIRECT switch is in the ON position.
TREBLE tone control
Use to adjust the high-frequency tone.
Should normally be left in the center position. Adjust balance if the
sound is louder from one of the speakers. If the right side is louder,
move toward the LEFT and if the left side is louder, move toward
the RIGHT.
NOTE:
This control does not operate
when
the CD DIRECT
or DAT
DIRECT switch is in the ON position.
| '
Q
'
|
i.
|
|
|
i
;
|
4
g
|
:
5
i
:
i.
'
|
'
ST
SRTEN
COTT
'
sso SFE
DUE
RIT
OE
ESTEE
SET
SSS
ETT
{ES
RTE IG
OTR
ESET
Advertenties
