Inhoudsopgave
Advertenties
en
de
Dismantling the milk system for cleaning:
1. Pull the milk frother (6) forward out of
the appliance.
2. Dismantle the milk frother into its indi-
vidual parts (6a) to (6d) (see i gure C at
the start of the operating instructions).
3. Clean the individual parts with a deter-
gent solution and a soft brush. If neces-
sary, soak in a warm detergent solution.
4. Rinse all parts with clear water and dry
them.
5. Reassemble all the parts and replace
fully in the appliance.
Risk of scalding
¡
Use this appliance only after the milk frother
(6) has been fully assembled and installed.
12
All manuals and user guides at all-guides.com
Cleaning the brewing unit
Clean the brewing unit regularly!
To pre-clean the brewing unit automatically:
1. Select
2. Place an empty glass under outlet (6a).
3. Press the start button (10).
The appliance rinses.
In addition to the automatic cleaning pro-
gramme, the brewing unit (5a) should be
removed regularly for cleaning. (See i gure
E at the start of the operating instructions.)
1. Switch the appliance off at the power
2. Open the door (5b) to the brewing unit.
3. Slide the red lock (5e) on the brewing
4. Press the red button (5d), grasp the
5. Rinse the brewing unit (5a) thoroughly
Important: Do not clean with detergent or
other cleaning agents and do not put it in
the dishwasher.
6. Wipe out the inside of the appliance
7. Allow the brewing unit (5a) and the in-
8. Reinsert the brewing unit (5a) fully into
9. Slide the red lock (5e) fully to the right
e
by turning the rotary knob (15).
on/off switch O / I (9). No buttons are lit.
unit completely to the left.
brewing unit by the recessed grips and
remove carefully.
under running water.
thoroughly with a damp cloth and re-
move any coffee residues.
side of the appliance to dry.
the appliance.
and close the door (5b).
Advertenties
Hoofdstukken
Inhoudsopgave
