Inhoudsopgave
Advertenties
Water i lter
A water i lter can prevent scale buildup.
Before a new water i lter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water i lter (20) i rmly into the
water tank with the aid of the measuring
spoon (19).
2. Fill the water tank (17) with water up to
the max mark.
e
3. Press and hold the
for at least three seconds. The menu
opens.
e
4. Press the
off /
button (13) repeat-
j
edly until the display shows
filter
.
Activate filter
5. Select
rotary knob (15).
6. Press the start button (10).
7. Place a receptacle with a capacity of 0.5
litres under the outlet (6a).
8. Press the start button (10).
9. Water will now l ow through the i lter to
rinse it.
10. Empty the container.
The appliance is ready to use once more.
Note: Rinsing the i lter simultaneously ac-
tivates the setting for the
display.
The i lter is no longer effective when the
Change filter!
display appears, or at
the latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance). Replacement i lters
can be obtained from retailers (TZ70003) or
from customer service (467873). If no new
filter
i lter is used, turn the
No / Old
.
All manuals and user guides at all-guides.com
off /
button (13)
j
Note: You can use the i lter indicator to
mark the month in which you inserted the
No / Old
i lter. You can also mark the month in which
you will need to replace the i lter next (at
with the upper
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
Change filter!
i lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
Menu settings
You can adapt the appliance to your indi-
vidual needs in the menu settings.
1. Hold the
2. Press the
setting to
3. Select the required setting with the up-
4. Coni rm by pressing the start button
To leave the menu without making any
changes, turn the rotary selector to
and press the start button (10).
e
off /
button (13) down for
j
at least 3 seconds.
e
off /
button (13) repeated-
j
ly until the required menu item appears
in the display.
per rotary knob (15).
(10).
de
en
Exit
7
Advertenties
Hoofdstukken
Inhoudsopgave
